Auto body repair shops use them in general body repair or replacement.
Auto Service Centers use them on mufflers, shocks and front end repairs.
Motor coach and R.V. builders use zip guns for sheet metal cutting, windows and doors.
Maintenance departments use them for general maintenance and repair.
Foundries use them for chipping of small castings.

Ajax offers a complete line of .401 & .498 tools for both industry and automotive uses.
Made of Hi-Grade alloy steel, these tools are the finest available.

.401 Shank Round Collar

.498 Shank Round Collar

Part # .401 Shank	Size	Length	Part # .498 Shank	Size	Length	Description
901		4-1/4"	965		4-1/4"	Universal Joint & Tie Rod Tool
902		6-7/8"			6-7/8"	Tail Pipe Cutter
903-5/8 903-3/4 903-1 903-1-1/4	5/8" 3/4" 1" 1-1/4"	7-1/4"	968-1 968	1" 1-1/4"	7-1/4"	Fork Chisel
904		6-1/4"				Bushing Remover Chisel
905	1-5/16"	6-1/4"	955	1-5/16"	7"	Wide Chisel & Scraper
906		6-1/4"	964		7"	Bushing Splitter
907		5-3/8"				Claw Ripper- Edging Tool
908		7-1/2"				Muffler Cutter
909		6"	959		6-7/8"	Double Blade Panel Cutter
910 910-1/2 910-5/8 910-11 910-18 910-1-1/2 910-11X1-1/2 910-2	3/4" 1/2" 5/8" 3/4" 3/4" 1-1/2" 1-1/2" 2"	6-1/2" 6-1/2" 6" 11" 18" 6-1/2" 11" 7"	960 960-12 960-18 960-1-1/2	5/8" 5/8" 5/8" 1-1/2"	7" 12" 18" 9"	Flat Chisel
911		6-1/2"	961		7"	Tapered Punch
912	5/8"	5-3/4"	962	5/8"	5-3/4"	Rivet Cutter
913 913-18		6-1/2" 18"	963 963-18		7" 18"	Straight punch
914		6-1/4"				Vee Chisel / Spot Weld Breaker
916 918 920	#6 (7/64") #8 (9/64") #10 (5/32")	5-1/2"				Piercing Punch
919	5/8"	10-1/2"				Flat Offset 30°
921		8-3/8"				Offset Bushing Splitter
922		6-3/4"				Spoon Chisel
923		5-3/4"				Single Blade Cutter
925 925-18		6-1/2" 18"				Pencil Point
930		7-1/2"				Muffler & Pipe Cutter
932 932-18		8-1/2" 18"				Kwik Cutter
933		8-1/4"				Inside Muffler Cutter
934		8-1/4"				Outside Muffler Cutter
940		7"				Moil Point
945 945-7		4-1/4" 7"	967		4-1/4"	1" Diameter Hammer
951		6-1/2"				Undercoat Scraper
1100 1100-18 1101+ 1101-18	5/16" 5/16" 3/8" 3/8"	10" 18" 10" 18"				Nut Splitter
1602+ 1603+	1" 1-3/4"	3" 3-1/4"	1600 1601+	1" 1-3/4"	3" 3-1/4"	Smoothing Hammer

See also Non-Sparking tools

^Top

Part #	Body	Pilot	Length	Valve Guide Drivers
1121	.420"	1/4"	7-1/2"
1122	.420"	5/16"
1123	.480"	11/32"
1124	.480"	3/8"
1125	.480"	7/16"

Part #	Size	Head	Length	Rivet Sets
1604	3/16"	Round	3-1/2"
1605	1/4"	Round
1606	5/16"	Round
1610	3/16"	Mod. Brazier
1611	1/4"	Mod. Brazier
1612	5/16"	Mod. Brazier
1620++	3/16"	Brazier
1621+	1/4"	Brazier
1622+	5/16"	Brazier
1636+	3/16"	Universal
1637+	1/4"	Universal
1638++	5/16"	Universal

Part #	Punch Diameter	Roll Pin No	Length	Roll Pin Drivers
1102+	1/4"	8	7-1/2"
1103+	5/16"	9
1104	3/8"	10
1105+	1/2"	12
1106+	Set of 4

Part #	Diameter	Length	Hinge Pin Drivers
1111	.237	7-3/8"
1112	.302
1110	Set of 2

Part #	Pilot	Length	Bushing Drivers and Extension
1126	1/2"	5-1/2"
1127	1/2"	9-1/2"
1128		5"

Part #	Size	Length	Hand Held Fork Tool
528	3/4"	12"
529	1"	12"

Part #	Square	Length	Square Drive Socket Adaptors
1129	3/8"	5"
1130	1/2"	5-1/2"

Used to loosen tight fasteners, adapts to 3/8" and 1/2" Impact Sockets

Part #	Description	Freeze Plug Installation Sets
1160	Freeze Plug Installation Set Contains 1161, 1162-1, 1162-2 and 1162-3
1161	14" OAL Driver
1161-22	22" OAL Driver
1162-1	Head Fits 1" & 1-3/8" (25mm & 35mm)
1162-2	Head Fits 1-25/64" & 1-5/8" (35.3mm & 41.2mm)
1162-3	Head Fits 1-3/4" & 2-1/16" (44.4mm & 52.3mm)

Part #	Shank	Brake Pin & Bushing Driver Kit
1166	.401
954	.598

Part #	Length	Panel Crimper
944	7"

^Top

Part # 9029

Contains one each of the following:
905
906
907
908
909
910
911
912
932

Part # 9024

Contains one each of the following:
906
908
910
912

Part # 9044

Contains one each of the following:
902
907
909
914

Part # 9034

Contains one each of the following:
908
932
933
934

Part # 9022

Contains one each of the following:
901
903-1
903-3/4
921

^Top

Ajax non-turn tools have four ball slots rather than a collar. This allows the retainer balls to seat
into the slots, preventing the tool from turning.

.401 Non-Turn Shank

.498 Non-Turn Shank

^Top