5 Gallon Air Manifold
Part # HV-5G-4P
Equipped with Gauge and safety valve.
Top and bottom brackets for easy stacking or mounting to skids or other surfaces.
Easy to transport with 2 carry handles
3/4" outlets
5 Gallon Capacity
200 PSI Working Pressure
300 PSI Test Pressure
1" Inlet Size
10" Tank Diameter
20" Width with Fittings
14-1/2" Height
20" Length
Weight 36 lbs
15 Gallon Air Manifold
Part # HV-15G-8P
Equipped with Gauge and safety valve.
Top and bottom brackets for easy stacking or mounting to skids or other surfaces.
Easy to transport with 2 carry handles
3/4" outlets
15 Gallon Capacity
200 PSI Working Pressure
300 PSI Test Pressure
2" Inlet Size
12" Tank Diameter
22-1/2" Width with Fittings
16-1/2" Height
44" Length
Weight 77 lbs
20 Gallon Air Manifold
Part # THB20NTP-MAN
Available in many configurations, up to 12 exits.
1/2" or 3/4" NPT with or without universal couplings.
Available with a 4 lug universal inlet.
(Note: We can also supply larger tanks)
Part # | Gallons | DIA | L | A | B | C | D | E | F | G | H | J | K | M | Weight LBS |
THB12 | 12 | 12 | 27 | 3/4 | 1/2 | 1/2 | 1/4 | 15 | 9 | 5-1/2 | 1-3/16 | 14-5/8 | 11 | 12 | 44 |
THB20 | 20 | 14 | 33 | 1-1/2 | 1/2 | 1/2 | 1/4 | 19 | 10 | 6 | 2 | 17-1/2 | 14 | 15-1/2 | 63 |
THB30 | 30 | 16 | 38 | 1-1/2 | 1/2 | 3/4 | 1/4 | 24 | 12 | 6 | 2-1/2 | 20 | 15 | 19 | 99 |
THB60 | 60 | 20 | 48 | 2 | 3/4 | 1 | 1/2 | 30 | 14 | 7-3/4 | 3-3/16 | 24-3/4 | 18-3/4 | 21 | 177 |
THB80 | 80 | 20 | 63 | 2 | 1 | 1-1/2 | 3/4 | 36 | 14 | 9 | 3-3/16 | 24-3/4 | 18-3/4 | 21 | 230 |
THB120 | 120 | 24 | 69 | 2 | 1-1/2 | 1-1/2 | 3/4 | 44 | 16 | 10 | 3-3/16 | 29 | 23-3/4 | 26-1/2 | 343 |
THB240 | 240 | 30 | 84 | 2 | 2 | 2 | 1 | 48 | 18 | 12 | 3-3/16 | 35 | 27-1/2 | 30 | 658 |
Dimensions are subject to change, please verify at time of order.
Part # | Gallons | DIA | L | A | B | C | D | E | F | G | H | J | BC | Weight LBS |
TVB30 | 30 | 16 | 38 | 1-1/2 | 1/2 | 1/4 | 1/4 | 8 | 1-3/4 | 1-1/2 | 23 | 9 | 18-3/4 | 99 |
TVB60 | 60 | 20 | 48 | 1/2 | 3/4 | 1/4 | 2-1/4 | 1-1/2 | 24 | 10 | 23-3/4 | 151 | ||
TVB80 | 80 | 24 | 48 | 2 | 3/4 | 1/4 | 1/2 | 11 | 3-3/8 | 1-1/2 | 30 | 13 | 25-1/2 | 269 |
Dimensions are subject to change, please verify at time of order.
Heavy duty steel tanks built for air compressor
service in new or replacement installations.
Portable units include
semi-pneumatic tires, axle assembly and pull-type handle.
All units have steel platform for
mounting compressor and motor plus adequate 1/4, 3/8 and 1/2"
NPT openings.
Portable tanks can be assembled in minutes.
Part # | Gallon | Tank Type |
DIA | OAL | Platform | |
Length | Width | |||||
3Z404 | 20 | Portable | 14 | 32-5/8 | 23-3/8 | 9 |
1Z717 | 12 | Stationary | 14 | 27 | 12 | 11 |
Dimensions are subject to change, please verify at time of order.
Part # 2Z561
Converts many 12 & 20 gal. portable compressors to stationary units. Kits consists of mounting bracket, hardware and assembly instructions.
Twin Tank
Heavy-duty tanks for new or replacement applications. All tanks have rubber mounting feet.
Maximum working pressure:
125 PSI.
NOTE:These tanks are NOT ASME Certified.
8 gallon twin tank features include 7-gauge steel base plate, low center of gravity for stability and maneuverability as well as being able to accept up to a 10" wheel. The 7/8" tube handles can be used with standard bicycle and grips.
Predrilled base plate accommodates:
56 Frame NEMA motor #150-0055
Gasoline engines up to 5-HP #150-0053
1/2" NPT ports for controls and check / safety valves
Two 1/4" NPT drain ports (one per tank)
Tank Type |
Gallon | DIA | Length | Width | Height | Weight |
Twin | 8 | 6" | 42" | 18" | 12.8" | 63 |
Dimensions are subject to change, please verify at time of order.
Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.