514-336-3820
514-745-1764
MILWAUKEE encapsulated brushes are bonded
in a synthetic elastomer material.
Encapsulation produces
a brush in which the individual wire tips are firmly supported.
This assures a safe, well balanced brush which will normally
have a longer life than conventionally constructed wire
brushes.
A consistently stiff brushing action is assured
because, in use, the elastomer material gradually wears
away exposing only the wire tips.
All brushes on the page
are carbon steel.
| Part # | Diameter | Wire Size | Approximate Face Width |
Approximate Trim Length |
Recommend Arbor Hole |
Maximum Safe Free Speed (R.P.M.) |
| 0143 | 4" | .010 | 3/8" | 3/4" | 1/2" | 6000 |
| 0144 | 6" | .0118 | 1/2" | 1-1/4" | 1/2" | 6000 |
| 0145 | 6" | .0118 | 1" | 1-1/4" | 2" | 6000 |
| 0146 | 8" | .014 | 1/2" | 2-1/4" | 5/8" | 4500 |
| Part # | Diameter | Wire Size | Approximate Face Width |
Approximate Trim Length |
Recommend Arbor Hole |
Maximum Safe Free Speed (R.P.M.) |
| 0362 | 1-1/2" | .008 | 3/16" | 3/8" | 3/8" | 20,000 |
| 0363 | 1-1/2" | .014 | 3/16" | 3/8" | 3/8" | 20,000 |
| 0364 | 2" | .008 | 1/4" | 1/2" | 1/2" | 18,000 |
| 0365 | 2" | .0118 | 1/4" | 1/2" | 1/2" | 18,000 |
| 0366 | 3" | .008 | 1/4" | 1" | 1/2" | 15,000 |
| 0367 | 3" | .014 | 1/4" | 1" | 1/2" | 15,000 |
| Part # | Diameter | Wire Size | Trim Length |
Shank Diameter |
Maximum Safe Free Speed (R.P.M.) |
| 20449 | 3/4" | .006 | 1" | 1/4" | 15,000 |
| 20450 | 3/4" | .010 | 1" | 1/4" | 15,000 |
| 20451 | 1" | .006 | 1" | 1/4" | 13,000 |
| 20452 | 1" | .014 | 1" | 1/4" | 13,000 |
| Part # | Diameter | Wire Size | Arbor Hole |
Maximum Safe Free Speed (R.P.M.) |
| 20354 | 4" | .0118 | 5/8"-11 | 6,000 |
| 20355 | 4" | .020 | 5/8"-11 | 6,000 |
| 20356 | 6" | .020 | 5/8"-11 | 6,000 |
| Part # | Diameter | Wire Size | Brush Part Length |
Overall length |
| 20026 | 1/2" | .006 | 2" | 5" |
| 20027 | 5/8" | .008 | 2" | 5" |
| 20028 | 3/4" | .010 | 2-1/2" | 5-1/2" |
| 20029 | 7/8" | .010 | 2-1/2" | 5-1/2" |
| 20030 | 1" | .010 | 2-1/2" | 5-1/2" |
| SIZE | 1/4" | 3/8" | 1/2" | 5/8" | 3/4" | 7/8" | 1" | 1-1/4" | 1-1/2" | SPECIAL |
| NO. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
When ordering, add the Arbor Hole Number as the last digit of
the Part #.
Indicate any arbor size not shown in the
table (Special) by adding"0" as the Arbor Hole
Number and specify the size you want.
Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.
Airtek (1990) Ltée, 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820